Got space problems? Changing the way your door swings might help, and you can change the look and feel of your room. Here’s how.
In order to make more room to maneuver in this petite bathroom, the homeowners reinstalled the door so that it swings out.
A 32-inch door typically eats up about 13 sq. ft. of floor space when it swings. Change the door swing and you can decide where to place that wasted space — on the left or right of your doorway, or on the inside or outside of the wall.
Here are some advantages of changing the swing:
- Change the swing from inside to outside, and you can reclaim the entire 13 sq. ft. in a small room, which could let you have that sofa after all.
- Change the swing from left to right (or vice versa) and you free up the wall space where the door would rest. Now you’ve got room for a desk, table, or dresser.
- Remove the door and switch to a sliding or pocket door, and you have 13 sq. ft. to use any way you want.
Changing the way a door swings might take a carpenter about an hour to do. But you can do it yourself if your carpentry skills are up to snuff. Here’s how:
1. Remove the existing door, hinges, and strike plate from the doorjamb. (If you’re moving the door so it swings from the opposite side, but still swings into the same room, you won’t have to change the door stop molding.)
2. Router or chisel new hinge and strike plate recesses on the opposite jamb.
3. Repair the old hinge locations with wood putty or filler, then prime and paint the jamb.
4. Rehang the door.
5. Relocate the doorstop bumper that prevents the door from hitting the wall. Patch and paint the old hole.
If you’re changing the door so it swings into a different room, you can remove the entire doorjamb and turn it around:
1. Remove the hinge pins and take off the door, leaving hardware in place.
2. Pry off the casing. If you can save it, great, but it often breaks so be prepared to buy new casing.
3. Pry off the doorjamb, or use a reciprocating saw and metal-cutting blade to cut the nails holding the doorjamb in place.
4. Reverse the doorjamb and reinstall it.
You can save yourself a lot of hassle by installing a new, pre-hung door ($240-$401) that swings the way you want. That way you avoid all that moving, routing, and patching.
The International Residential Code (IRC) doesn’t rule on bedroom door swings. But, unless space is an issue, most bedroom doors swing in. That way, if you’ve got to get out in an emergency, the bedroom door doesn’t swing into a hallway blocking or hitting others also fleeing for their lives.
Of course, each local ordinance has its own building code, though most work off the IRC. To be safe, check local codes before construction.